hand forged wedding bands – hammered rings with stepped edges
- 18k gold: white, yellow or rose
- Larger band: 5mm x 2mm, comfort fit
- Smaller band: 3mm x 2mm, comfort fit
- Flat profile
- Pebble hammering with stepped edges
- Polished finish (or satin)
- Made to order in 4-6 weeks, depending upon the length of our queue
- Please contact us for customization
These lovely bands will be poured and hand-rolled from a single ingot of 18k white gold that Dan has alloyed himself. With these bands, you will feel a warmth that comes from knowing that the symbols of your devotion to one another were created from the same source!
The bands are hammered in the center section with our “pebble” hammering style and have polished stepped edges, approximately 1mm wide each, on either side. The larger band is 5mm in width and the smaller band is 3mm in width. Both bands are made from hand-milled stock that is 2mm thick; and they are finished in a comfort fit profile, with rounded inner edges.
Your rings will be made from scratch: Dan will alloy an ingot of gold, pour it, hand roll it and finish it to your preference. Because the metal is cold worked, hand forged bands like these are denser and stronger than bands that are cast.
The center section of the pictured bands is hammered in our “pebble” style; but we have other hammering styles available as alternative options.
View our other hammering styles here.
Find out more about Dan here.
Thank you for visiting!